WARM VIBES! ENERGY VIBES!

With two massage levels, Sempasi Virgo offers you a warm relaxation program, up to 12,000 vibrations per minute,
and one revitalizing, up to 8,500 vibrations per minute.

Heat relaxation:
Regeneration and uniform appearance

Is your goal an even-looking, wrinkle-free skin? Choose the massage
program in warm mode, with a temperature of up to 45 degrees Celsius.

The temperature of 45 degrees Celsius can feel stronger or weaker,
from one person to another, depending on the type of complexion and the
sensitivity of the skin.

Red LED color

Heat massage

Vibration frequency is up to 12,000 vibrations per minute

Smart sensor

Ions +/-

Cold invigoration:
Soothe and energize the skin

If you have sensitive skin or an oily complexion, cold massage is ideal for soothing and revitalizing the skin.

Depending on skin type and skin sensitivity, the cold massage may feel stronger or weaker from one person to another.

Blue LED color

Cold massage mode

Vibration frequency is up to 8,500 vibrations per minute

Smart sensor

Ions +/-

Hi Tech Therapy

Blue and red are not just codes for temperature, but indicators of hi tech therapy, with positive ions and negative ions.

Ion therapy has two main functions:

deep cleaning,

improving the absorption of nutrients in the skin. ⠀

Positive ion therapy

Some of the impurities penetrate deep into the skin and cannot be
removed with the usual make-up remover and cleaning products. They are
electrostatically negatively charged. Virgo programs generate strong positive ions that bring impurities from the skin to the surface where they can be easily removed with a cleansing gel.

Negative ion therapy

Virgo programs generate a large amount of negative ions that bind with the positive ions in the skin cells. This allows the nutrients in the care products to reach the deeper layers of the skin.

Virgo Pro is always used on previously cleansed skin and together
with a care product (serum or cream, suitable for your skin type);

Turn on the device by pressing the ON/OFF button for 3 seconds;

Select the desired program: cold (blue LED light) or warm (red LED light) by briefly pressing the on/off button;

Touch the skin with the inner spring (metal part) to start the care routine and relax the muscles;

Massage the skin from the inside out, from the chin to the forehead;

Every 60 seconds, you will hear a short beep to change the massage area;

The recommended time of use is 5-10 minutes per session, and the
device can be used up to 2 times a day, in the morning and in the
evening;

If the device is not in use, it will automatically shut down after 2 minutes, for safety reasons and to protect the environment.

Loading

The device is charged using the USB cable.

A full charge takes about 2 hours and allows up to 15-20 days of use for an average use of 5 minutes per day.

In warm massage mode, a full charge allows up to 30 minutes of use.

In cold massage mode, a full charge allows up to 10 hours of use.

The red light flashes when the battery is low.

The blue light flashes while charging.

The blue light stays on when the battery is fully charged.

Caution!

1. Sempasi Virgo is a smart device: it vibrates only when it comes
into contact with the skin and at the same time you hold your finger on
the smart sensor (the metal part around the LED, located on the opposite
side of the power button/ off).

2. The device turned on in warm mode will gradually heat up after
the first 30-60 seconds of continuous contact of the device with the
skin.

3. The massage program with heat function makes Virgo reach the
temperature of 40-45 degrees Celsius. The device heats up only on the
inner metal spring (concave side).

4. If the device is not used, it will automatically shut down after 2
minutes, for safety reasons and to protect the environment.

5. The device has a program memory function when it is turned on, it will automatically enter the mode you chose last time.

6. The product can be used on the face, neck and hands area.

7. Stop using the device if you feel discomfort, irritation or pain.

8. The device is not waterproof. Avoid contact with water.

9. Put the product in a dry and ventilated place, avoid direct
exposure to the sun and make sure there are no corrosive chemicals.

10. The material for cleaning the device can be soft, made of cotton.

11. Use a moderate amount of skin care product as it can seep into
the device and damage it. After each use, it is recommended to clean the
device with a clean, soft material.

12. After a long period of time, the product needs 15 minutes of reactivation, to reach optimal operation.

13. Keep out of reach of children!